BKWVN - 57-74/44 F-044 THREAD CUTTING OIL
- MSDS: BKWVN
- Manufacturer: MIDCO PRODUCTS CO INC
- Product Name: 57-74/44 F-044 THREAD CUTTING OIL
- National Stock Number: 9150-00F017952
Product Identification
Product ID:57-74/44 F-044 THREAD CUTTING OIL
MSDS Date:02/12/1990
FSC:9150
NIIN:00F017952
MSDS Number: BKWVN
Responsible Party
MARYLAND HEIGHTS, MO 63043
Emergency Phone: (314) 567-1710
Info Phone: (314) 567-1710
Preparer: GEORGE LAMB
Cage: OBTA6
Contractor
Telephone: (314) 567-1710
Cage: OBTA6
Ingredients
PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
CAS: 64742-52-5
RTECS: PY8035000
ACGIH TLV: 5 MG/CUM
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
CAS: 64741-96-4
RTECS: PY8040000
ACGIH TLV: 5 MG/CUM
CHLORINATED PARAFFIN, CHLOROALKANES
CAS: 61788-76-9
ACGIH TLV: 5 MG/CUM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
ISOBUTANE, 2-METHYLPROPANE
CAS: 75-28-5
RTECS: TZ4300000
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS, OR
WATERING. SKIN: ITCHING, DRYNESS, REDNESS OR IRRITATION. INGESTION:
NAUSEA, HEADACHE, VOMITING. INHALATION: NAUSEA, OR DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: ITCHING, DRYNESS, REDNESS, OR IRRITATION.
EYES: IRRITATION, REDNESS, OR WATERING. INGESTION: NAUSEA,
HEADACHE, VOMITING. INHALATION: NAUSEA, OR DIZZINESS.
Medical Cond Aggravated by Exposure:SKIN SENSITIVITY & CHEMICAL
ALLERGIES
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, STANDARD FOAM, DRY CHEMICAL, HALON
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:EXPOSURE TO TEMPS >120F CAUSE BURSTING OR
VENTING. HEAT OR FIRE MAY CAUSE HAZARDOUS FUMES.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. DIKE AREA IF
POSSIBLE FOR MATERIAL RECOVERY. SMALL QUANTITIES MAY BE ABSORBED
W/ABSORBENT MATERIALS.
Handling
Handling and Storage Precautions:DON'T STORE WHERE TEMPS >120F. KEEP
OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:AS REQUIRED
Ventilation:PROVIDE MECHANICAL VENTILATION TO KEEP
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
Chemical Properties
Vapor Pres:70 PSIG
Vapor Density:>1
Spec Gravity:0.92
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN W/SWEET ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, OPEN FLAMES, TEMPS >120F & OTHER
SOURCES OF IGNITION.
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS & EPA STANDARDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.